PRESERVATION OF PALM WINE USING ULTRAVIOLET RADIATION
Sold By: Joe Project Store | Item Type: Project Material | Report this? | Attributes: 65 pages | 1-5 chapters | Amount: ₦5,000 | 8 orders. | Marked useful: 10,373 times
INSTANT PROJECT MATERIAL DOWNLOADABSTRACT
This study was aimed at the preservation of palm wine using ultraviolet radiation. The experiments were done using an ultraviolet sterilizer at time intervals of 2, 4,7,25 and 29hours. The freshly tapped palm wine was first analyzed and result shows that the pH, sugar content, specific gravity titrable acidity, alcohol and total solids recorded values of 6.60, 5.40, 0.984g/m3, 0.66, 4.2(%by/v) and 10.5g/100ml respectively. On the other hand, the result of the sterilized palm wine shows that as time increases, the pH increases from 6.60-6.69. Also sugar content increases from 5.40 -6.82 as time increases from 0-29hours. However, the alcoholic content decreases from 4.20-1.50(%by/v) as time increased. Conclusively, the ultraviolet radiation was effective in stopping the fermentation of the palm wine.
TABLE OF CONTENT
Title Page i
Letter of Transmittal ii
Approval page iii
Dedication vi
Acknowledgement v
Abstract vii
Table of content viii
CHAPTER ONE
1.0 Introduction 1
1.1 Background of the Study 1
1.2 Statement of the problem 4
1.3 Aim/Objective of the Study 6
1.4 Scope and Limitation of the Study 6
1.5 Method of Research 7
1.6 Significance of the Study 7
CHAPTER TWO
2.0 Literature Review
2.1 History of Palm Wine 9
2.2 Physical Properties of Palm Wine 10
2.3 Chemical Properties of Palm Wine 11
2.4 Types of Palm Wine 12
2.5 Composition of Palm Wine 14
2.6 Physical Composition of Palm Wine 15
2.7 Chemical Composition of plant wine 18
2.8 Biological Composition of Palm Wine 20
2.9 Production of palm wine 24
2.10Uses of Palm Wine 27
2.11Historical Development of Preservation 29
2.12 Method of Preservation of Palm Wine 32
2.12.1 By Canning Method 34
2.12.2 Pressure Canning 34
2.12.3 Pasteurization 35
2.12.4 Refrigeration 36
2.13Yeast present in palm wine 37
2.14 The acidity of palm wine stability, temperature
And wine stability 39
2.15 Kinetics of destruction of micro-organism
Detoriation in palm wine 42
2.16 Alcoholic content determination 43
2.17 Distillation process 45
CHAPTER THREE
Methodology
3.1 Materials 49
3.1.1 Samples Collection of Palm Wine 49
3.1.2 Equipment Used 49
3.2 Method 51
3.2.1 Analysis of the Raw Palm Wine 51
3.2.1.1 pH Value 51
3.2.1.2 Sugar Content (Sucrose oBrix) 51
3.2.1.3 Specific Gravity 51
3.2.2 Palm Wine Sterilization Using
Ultraviolet Radiation 52
CHAPTER FOUR
Result and Discussion
4.1 Characterization of Raw Palm Wine 54
4.2 Discussion 56
4.2.1 Effect of UV Sterilization on the pH of
Palm Wine 57
4.2.2 Effect of UV Sterilization on the Sugar
Content of Palm Wine 57
4.2.3 Effect of UV Content of Palm Wine Sample 57
CHAPTER FIVE
Conclusion and Recommendation
5.1 Conclusion 59
5.2 Recommendation 60
Reference 61
Appendix I 69
Appendix II 73
Appendix III 74
Appendix IV 75
CHAPTER ONE
INTRODUCTION
1.1 BACKGROUND OF THE STUDY
Palm wine is an important alcoholic beverages resulting from the spontaneous fermentation of the sap of which has been attributed to years and bacteria (Okafor, 1978).
Palm wine is consumed in parts of Africa, Asia and South America. In Nigeria, the two principal sources of sap for palm wine. Fermentation is the oil palm (Ecaeis guineesis) and the Raphia palms (Raphia SPP). It is highly perishable liquid consisting mainly of water, sugar, vitamin and mainly of aroma and flavor components in every small amount. Palm wine have several nutritional, medical, religious and social uses which have been reported elsewhere (Faparvunis, 1966). Odemiymi1977; (Ikenebomeh and Omayunil 1988; Uzogara et al., 1990, Iheonu, 2000).to have increasingly enhanced the demand for this natural product.
Fermentation begins immediately after collection as a result of natural yeasts in the air and wine within two hours, the alcoholic content reaches approximately 4%.
At this stage, the product is sweet while mildly intoxicating aromatic beverages continued fermentation for up to 24hours and sour white drink. This palm wine can also be distilled into whisky –like drinks with higher alcoholic content (up to 40%) beyond a certain threshold; the wine no longer gains alcohol (Adam, 1995).
Many factor including the species of the tree, the season of the year, time of day at harvest and type of soil impact the alcoholic content of the wine. In-fact, these factors play a key role in the characteristics of the final product as rudimentary storage and production facilities do little to preserve to avoid fermentation of micro-organism which can affect the pH values, sugar content, alcoholic content, refractive index and specific gravity. These can be affected due to micro-organism and bacterial that has contaminated with the product. If it carefully preserved, it will retains all nutritional values and last for a short periods of time, days and weeks.
Preservation can be achieved in the difference ways either by physical or chemical method, preservation method of palm wine has perfected locally, it involves pasteurizing and bottling of the palm wine which increase its shell life to over six months.
This method of palm wine preservation makes it more hygienic and consequently more attractive to the city dwellers (Rangana, 1986).
Physical preservation entails process such as refrigeration, drying, pasteurization,sterilization etc.
Preservation additives reduce the risk of product borne infection, decrease microbial spoilage and preserve fresh attributes and nutritional quality.
Some physical techniques include dehydration, U.V.C radiation, freezing, drying, refrigeration, pasteurization, sterilization etc. (Ran Gana,1986).
1.2 STATEMENT OF THE PROBLEM
Palm wine is an alcoholic beverages created from the fermented sap of various palm trees. It is collected (or tapped) from tall palm tree or raffia tree which is shorter and thus more accessible. There are reports that some people also collected sap from oil palm tree(Elaisguineenis). However, sap from a palm tree (Raffia tree) is milkier and sweeter. When palm wine is tapped fresh and not fermented, it is considered a fruit juice or drink as it contains no level of alcohol% which makes it highly nutritious and beneficial to the body.
Fermentation of palm wine begins immediately after collection as a result of natural yeasts in the air and wine.
Within two hours, the alcohol content reaches approximately 4%. At this stage, the product is a sweet while mildly intoxicating aromatic beverage continued fermentation for up to 24hours results in a more alcoholic acidic, sour and bacteria.
Formation of bacteria can be achieved by by preservation of palm wine using different method like physical which includes ultraviolet radiation, freezing and pasteurization, and chemical methods which involves introducing a chemical in the palm wine.
This research work seeks to x-ray the preservation of palm wine using UV radiation.
1.3 AIM/OBJECTIVE OF THE STUDY
The aim of the study is to preserve palm wine using ultraviolet rays.
This aim will be achieved through the following objectives.
1. To study the characteristics properties of the raw fresh palm wine.
2. to study the effects of process parameters like time, pH, specific gravity, alcoholic content, refractive index on the preservation.
3. To study the characteristics properties of the palm wine after the preservation.
1.4 SCOPE AND LIMITATION OF THE STUDY
The following areas will be covered in the research.
1. Collection of palm wine
2. Characteristics of the palm wine
3. Preservation of the palm wine using ultraviolet rays.
4. Characterization of the palm wine after preservation.
5. The use of ultraviolet radiation for palm wine preservation leads to poor penetrability.
6. There is the possibility of a decrease in the taste and flavor of the palm wine after preservation.
1.5 METHOD OF RESEARCH
The information on this research project was gotten from chemical Engineering journals, chemical Engineering textbooks, internet exploration, and resource consultants in the field of knowledge as well as practical/experimental work.
1.6 SIGNIFICANCE OF THE STUDY
The following are the contributions of this research:
This material content is developed to serve as a GUIDE for students to conduct academic research
DOWNLOAD THIS PROJECT MATERIAL NOW!
Advertise Here
Not what you were looking for? Perform a search
What's your project topic?
Comment on Facebook:
Related Project Materials
- 1.
PREPARATION OF SOAP USING DIFFERENT TYPES OF OILS AND EXPLORING ITS PROPERTIES
ABSTRACT Soaps are the sodium salts or potassium salts of stearic acids or any other fatty acids. They are prepared by the saponification proces...More »
Item Type: Project Material | 50 pages | 0 engagements |
- 2.
THE REFURBISHMENT OF TEMPERATURE CONTROL APPARATUS
ABSTRACT A temperature control apparatus an “Armfield model was refurbished. The methodology employed were to detect the pulty parts of the ...More »
Item Type: Project Material | 50 pages | 8,502 engagements |
- 3.
PRODUCTION OF CRUDE OIL-DRILLING PROCESS
ABSTRACT The tremendous (large) demand of some petroleum fractions in our modern world today has drive some professionals...More »
Item Type: Project Material | 50 pages | 0 engagements |
- 4.
PRODUCTION OF LIQUID AND VAPORIZED PERFUME
ABSTRACT This research project was carried out principally for the production of liquid and vapourized perfumes from local raw materials. The ...More »
Item Type: Project Material | 50 pages | 14,389 engagements |
- 5.
PROCESS AND QUALITY FACTORS IN LAUNDRY AND TOILET SOAP PRODUCTION
ABSTRACT This projects is aimed at knowing the process and quality factor in Laundary and Toilet Soap Projection. Various factors affected the...More »
Item Type: Project Material | 50 pages | 9,007 engagements |
- 6.
THE USE OF LOCAL PIGMENTS AND EXTENDERS FOR FORMULATION & PRODUCTION OF EMULSION PAINT
ABSTRACT The major aim of this project research work is to produce emulsion paint from locally sourced pigment & extenders. The materials use...More »
Item Type: Project Material | 50 pages | 9,009 engagements |