What's your project topic?

Electrical Engineering Project Topics & Research Materials | Final Year Research Project Topics With Free Chapter One

• 1. DESIGN AND CONSTRUCTION OF MICROCONTROLLER TIME SOCKET OUTLET

  » CHAPTER ONE CHAPTER ONE     INTRODUCTION     BACKGROUND INFORMATION     As the world becomes concerned with conserving electric power and the fuels that generate electricity, there is a growing need for the conscientious homeowner to keep an eye on and minimize their power usage.   Vampire or standby power is loosely defined as the “electricalpowerconsumed by appliances while they are swi...Continue Reading »

  Item Type: Project Material |  65 pages |  5,889 engagements | 

• 2. SOLAR POWER INVERTERS, ANALYSIS AND TEST EVALUATION

  » CHAPTER ONE INTRODUCTION The quest to satisfy our need for stable power supply in Nigeria has driven most Nigerians into an ardent search for alternative renewable power sources. One of such major renewable power source in use is solar energy, which is energy obtained from the radiation of the sun. To obtain electrical power from the sun, four key components are required to effectively and efficie...Continue Reading »

  Item Type: Project Material |  65 pages |  10,606 engagements | 

• 3. FACTORS MILITATING AGAINST THE PERFORMANCE OF STUDENTS IN APPLIED ELECTRICITY

  » ABSTRACT Until recently applied electricity technical education was meant for those who could not cope effectively with conventional academic pursuits. In Nigeria today, applied electricity technical education had become a thing of National Interest because it has been realized that it has efficacy in producing the dreamed and desired manpower for the nation. It was on this stand that the research...Continue Reading »

  Item Type: Project Material |  65 pages |  5,847 engagements | 

• 4. CONSTRUCTION OF 150 WATTS 162 AUDIO LOUDSPEAKER

  » ABSTRACT Audio loudspeaker (output transducer) is on of the most essential and powerful device used in telecommunication system. This is device capable of converting electrical signal into sound and vice versa. It is made up of few time of non magnetic wire wound on a light cylindrical former that is mounted so that it can move freely insides the magnetic field of a strong permanent magnet. The sp...Continue Reading »

  Item Type: Project Material |  65 pages |  5,314 engagements | 

• 5. CONSTRUCTION AND DESIGN OF A 6V RECHARGEABLE LAMP

  » ABSTRACT Man has been so used to electricity that he cannot do without it. The absence of electricity causes a lot of sadness in our daily lives. Due to this reason I decided to work on a by rechargeable lamp as my project.The project is to see how one can construct a source of high without really generating is from an A.C source. I decided to write on this project in order to saw how I can implem...Continue Reading »

  Item Type: Project Material |  38 pages |  10,300 engagements | 

• 6. CONSTRUCTION AND IMPLEMENTATION OF 6V RECHARGEABLE LAMP

  » ABSTRACT Researchable lamp is a source of light that is generated from a D.C sources of supply this D.C sources is a battery that can also way be charged when it current and voltage ruseI decided to work on this as my project because its importance. It is very portable and help the a lot during night reading It also serves as an immanency sources of light mostly when there is failure from out pub...Continue Reading »

  Item Type: Project Material |  65 pages |  6,030 engagements | 

• 7. CONSTRUCTION OF 100 WATT AUDIO AMPLIFIER SYSTEMS

  » ABSTRACT The purpose this text is to present at a primary and intermediate level a comprehensive over view of the construction principles and indeed the operation of a power amplifier with 100w as the output power.The history and importance of electronic as a unique braches of science cannot be over emphasized electronic as its history might have it is divide into sections the first began with the...Continue Reading »

  Item Type: Project Material |  65 pages |  6,052 engagements | 

• 8. DESIGN AND IMPLEMENTATION OF AN ELECTRONIC SIGN PATTERN DISPLAY

  » ABSTRACT This design implementation of this electronic sequential sign post display employs the use of some specialized components. This section of the project introduces the reader to the different section of the project and the components that makes them up.Emphasis are laid on describing the behaviour and operational system of the components as related to the project modeling, analysis, design ...Continue Reading »

  Item Type: Project Material |  65 pages |  5,107 engagements | 

• 9. FIRST EDITION OF THE TAPE RECORDER SERVICING MANUAL

  » ABSTRACT The essential instrument for any workshop are now and flutter meter electronic mill voltmeter audio Osillator distortion test set: NAB1 D/N and CCIR weighting filers IKH2 band pass filter tension Jauges (with scale ranging from milligram to kilogram) Torgue Gauges B.A and metric open and box spanners a wide variety of test and connecting leads toad resistors and parallel boxes.   CHAPTER...Continue Reading »

  Item Type: Project Material |  65 pages |  4,792 engagements | 

• 10. DESIGN AND CONSTRUCTION OF HOUSE BELL WITH INDICATING LIGHT

  » CHAPTER ONE 1.0 INTRODUCTIONTo cleanly understand the wood information technology and communication which is the life blood of all human activities the assimilation of communication technology is of great important. The development of communication technology in any nation makers communication technology easy and pleasant. And one of basic building block of a communication system is the house bell...Continue Reading »

  Item Type: Project Material |  29 pages |  6,501 engagements | 

• 11. DESIGN AND CONSTRUCTION OF MINI RADIO BROADCAST TRANSMITTER AND AUDIO CONSOLE US...

  » ABSTRACT The early transmitter for radio broadcasting is so big and bulky that they do occupy numerous spaces. The circuitries are mainly designed with valves, which are big in sizes.With the advent of semiconductor materials such as transistors electronic equipment are now becoming miniaturized such that small transmitters are now becoming handy and compact.In line with this we choose to design a...Continue Reading »

  Item Type: Project Material |  65 pages |  5,113 engagements | 

• 12. CONSTRUCTION OF A 3 PHASE MOTOR OPERATION INDICATOR

  » ABSTRACT The construction of a 3 phase motor operation indicator exposes the techniques and skills employed in the construction of complex electrical circuit. The combination of contactors overload relay and other component to achieved the desired goal is diagrammatically and descriptively treated of practical knowledge. CHAPTER ONE 1.0 INTRODUCTION 1.1 BACKGROUND This project is on the constructi...Continue Reading »

  Item Type: Project Material |  18 pages |  4,730 engagements | 

• 13. CONSTRUCTION OF TWO FEET ELECTRONICS FLUORESCENT LAMP

  » ABSTRACT Engineering being the mother every technology cannot be neglected. Without practical application in the field of engineering. The student and their tutors are impotent. The incrative nature of engineering depends on the technical know how of the engineer.The purpose of practical project to students is to help them acquire practical knowledge in their choosing area of specification. It hel...Continue Reading »

  Item Type: Project Material |  65 pages |  4,986 engagements | 

• 14. DESIGN AND IMPLEMENTATION OF A FOUR WAY TRAFFIC LIGHT CONTROL CIRCUIT

  » ABSTRACT This work has been aimed at efficient means of controlling the traffic effectively for twenty four hours. As the world is growing technologically more and more vehicles jump into the public road adding to the already existing number. Consequently, more efficient way of controlling the traffics becomes more desirable as compared to the obsolete way of using the traffic personnel’s.The de...Continue Reading »

  Item Type: Project Material |  65 pages |  6,642 engagements | 

• 15. DESIGN AND CONSTRUCTION OF A THREE PHASE AUTOMATIC PHASE SELECTOR

  » ABSTRACT The basic aim of the design and construction of this three phase automatic phase selector is to demonstrate how contactors can be used to switch in between three lines or phases e.g “RED, YELLOW AND THE BLUE PHASE” without interfering with the contacts.This type of phase selector is able to switch between phases with the aid of inter locking one phase to the other either one phase cir...Continue Reading »

  Item Type: Project Material |  55 pages |  4,890 engagements | 

• 16. DESIGN AND CONSTRUCTION OF 1000KWA STABILIZER

  » ABSTRACT Despite all attempt of the federal government to have not only an uninterrupted power supply for all cities in Nigeria, but a voltage that is inconformity with the recommended 220/230v for domestic consumption for example. The NEPA Plc is facing some difficulties in generating, transmitting and distributing the required voltage stabilizer, which could be connected, to the main and then th...Continue Reading »

  Item Type: Project Material |  65 pages |  5,793 engagements | 

• 17. DESIGN AND CONSTRUCTION OF A 220 12 VOLTS SINGLE PHASE STEP DOWN TRANSFORMER

  » ABSTRACT This is a technical project write up design and construction were carried out by me with deep intensive and extensive research work under the strict supervisor of Engr K.C Ugwu. I all give credit to the authors of the textbooks whose I referred to in the cause of writing this project and its subsequent design and construction. In this project, I shed light on the basic principle of operat...Continue Reading »

  Item Type: Project Material |  25 pages |  6,962 engagements | 

• 18. DESIGN AND CONSTRUCTION OF AN UNINTERRUPTED POWER SYSTEM UPS

  » ABSTRACT This uninterruptible power supplies device has the capability of converting from 12volts D.C to 220volts alternating current at the frequency of 50Hz with the help of a step up transformer. The main importance of this device is its ability to ensure absolute continuity of power to the computerized control system thereby protecting a critical equipment from electrical supply failure. Ups s...Continue Reading »

  Item Type: Project Material |  65 pages |  6,691 engagements | 

• 19. CONSTRUCTION OF A 12V BATTERY CHARGER

  » ABSTRACT This project, 12v battery charge consist of few chapters, deal extensively with the design and construction of a batter charge which is capable of charging a 12v battery.The introductory chapter goes a long why in defining the battery charger and explanations of the mode of operations will be death with as we proceed.   CHAPTER ONE 1.1 INTRODUCTION A device which consists of electrodes ...Continue Reading »

  Item Type: Project Material |  65 pages |  6,240 engagements | 

• 20. CONSTRUCTION OF AN INTRUDER ALARM SYSTEM

  » ABSTRACT The intruder alarm system was designed and build in order to let the industrial and commercial company know how important alarm system is all about. These can be of Good help if the intruder will look through this project and support for the development of this project as to let the Federal Government know that the young engineering of today can produce (construct) things that will help ...Continue Reading »

  Item Type: Project Material |  65 pages |  8,347 engagements | 

• 21. CONSTRUCTION OF A BATTERY CHANGER USING SILICON CONTROLLED REGULATOR SCR

  » ABSTRACT The practical importance of a battery charger in today world cannot be over emphasized. This is so as those batteries accumulators are immensely needed by out auto mobile and in science laboratories.This thesis describes the methodical approach to the design and construction of any battery charger. However the procedure fro developed cover the construction of battery charger for battery s...Continue Reading »

  Item Type: Project Material |  65 pages |  5,261 engagements | 

• 22. DESIGN AND CONSTRUCTION OF AN ARC WELDING MACHINE

  » ABSTRACT The machine is designed to serve with an output of 250A. it has two pats which are the primary and secondary parts. The primary part, through which voltage is supplied to the machine has 180 turns which is made of 2mm2 S.W.G 14 copper coil. The secondary part has 45 turns made of 4mm2 S.W.G 8 copper coil.Both turns are wound on separate limb of the laminated core. The voltage from primary...Continue Reading »

  Item Type: Project Material |  65 pages |  7,440 engagements | 

• 23. CONSTRUCTION OF AN FM TRANSMITTER

  » ABSTRACT This project work is on the construction of an F.M transmitter this system consists of four discrete modules namely the audio frequency (AF) amplifier (class A) the modulator the master oscillator and the radio frequency (RF) amplifier (ClassC) these formed the conventional events for building FM transmitter here the signal (from the microphone) is fed into the (AF) for amplification then...Continue Reading »

  Item Type: Project Material |  65 pages |  5,546 engagements | 

• 24. POWER AMPLIFIER

  » CHAPTER ONE INTRODUCTIONPower amplifier is an electronic device, which is used to increase sound energy. In other words, the final stage which must driven a given load e.g mechanical indicator, a loudspeaker cathode roy tade, magnetic deflection coil, a transmitting accrual of a communication network. Power amplifier is also used in regulation power supplies, chopper amplifier, motor controller et...Continue Reading »

  Item Type: Project Material |  55 pages |  5,334 engagements | 

• 25. DIGITAL INCUBATOR

  » CHAPTER ONE INTRODUCTIONIncubator has variety of applications but it has only one meaning, incubator is an apparatus consist of a box designed to maintain a constant temperature by the use of a thermoctal or thermictor; used for chicks or premature infants. Synoaym: brooder: it is an apparatus consisting of a box designed to maintain a constant temperature by the use of a thermostat; used for chic...Continue Reading »

  Item Type: Project Material |  65 pages |  7,584 engagements |