Home » Mechanical Engineering » THE CONSTRUCTION AND FABRICATED OF A MOBILE DEEP FREEZER

THE CONSTRUCTION AND FABRICATED OF A MOBILE DEEP FREEZER

Sold By: Joe Project Store | Item Type: Project Material | Report this?  |  Attributes: 65 pages | 1-5 chapters | Amount: ₦5,000 | Marked useful: 4,385 times

Delivery: Within 24 hours
ABSTRACT
This work on the construction and fabrication of a mobile deep freezer revolves around the concept of refrigeration. The concept of refrigeration revolves around the reverse Carnot cycle. This is  a cycle involving isentropic expansion (at the throttling valve), isothermal expansion (at the evaporator), isentropic compression (at the compressor) and isothermal compressor ( at the condenser) Compression raises the temperatures of the refrigerant above that of its natural surrounding so that it can give up its heat in a heat exchanger to a heat sink such as air or water (condenser). Expansion lowers the refrigerant temperature below the temperature that is to be produced inside the cooling compartment.
TABLE OF CONTENT
Title page
Approval page
Dedication 
Acknowledgment
Abstract
Chapter one: Introduction
Chapter Two: Literature Review
Chapter Three: Design Analysis and Calculations
3.1 Determination and choice of condenser and Evaporator temperature.
3.2 Cooling Load Calculation
3.3 Flow Rate
3.3.1 Mass flow rate
3.3.2 Ton of Refrigeration
3.3.3 Volume flow rate
3.4 Determination of Compressor size
3.5 Determination of pipe size and length
3.5.1 Comparing the velocities for different pipe size.
3.5.2 Summary table.
Chapter Four: Construction Details 
4.1 Material Selection
4.2 Sequence of operation
4.3 Assembly
Chapter Five: Cost Analysis
Chapter Six: Recommendation
6.1 Maintenance and use Instructions
6.1.1 Condenser Maintenance
6.1.2 Defrosting
6.1.3 Other Instructions
6.1.4 Common Complaints, Causes and Remedy
Chapter  Seven: Refrigerants
7.1 Requirements for refrigerants
7.2 Identifying Refrigerants by number
7.3 Halide refrigerants
7.4 Grouping and Classification of refrigerants
7.5 Group one Refrigerants
7.6 R-12 Dichlorodi Fluoromethane (ccl2f2)
7.7 R-22 Monochlorodi fluoromethane (CHCLF2)
7.8 R-11 Trichloromono fluoromethane (CCL3F)
7.9 Azeotropic Mixtures
7.10 R-500 Refrigerant
7.11 R-502 Refrigerant (R-22 + R-115) (CHCLF2/CCLF2 CF3)
7.12 R-503 Refrigerant (R-23 +R-13) (CHF3/CCLF3).
7.13 R-504 Refrigerant (R-32 +R115) (CH2F2 (F3 CCLF2)
7.14 Group  two refrigerants
7.15 R- 717 Ammonia (NH3)
7.16 Group three refrigerants
7.17 Expendable Refrigerants
7.18 Water  as a Refrigerants
7.19 Refrigerant Cylinders
7.20 Color code for refrigerants cylinders
Chapter Eight: Conclusion
Reference.

This material content is developed to serve as a GUIDE for students to conduct academic research
Find What You Want By Category:
Assignments
Business Plans
e-Books
Journals
Project Materials
Proposals
Seminar Reports
Term Papers

Delivery: Within 24 hours

Advertise Here

For advertisement, call 08168958821

Not what you were looking for? Perform a search

What's your project topic?

Comment on Facebook:

See More Mechanical Engineering Final Year Research Project Topics & Materials In PDF & Doc | iproject

More Project Material Departments