Home » Computer Science » DESIGN AND IMPLEMENTATION OF AUTOMATED MOTOR VEHICLE DRIVING LICENSING SYSTEM
DESIGN AND IMPLEMENTATION OF AUTOMATED MOTOR VEHICLE DRIVING LICENSING SYSTEM
Sold By: Joe Project Store | Item Type: Project Material | Report this? | Attributes: 51 pages | 1-7 chapters | Amount: ₦5,000 | 17 orders. | Marked useful: 9,491 times
Delivery: Within 24 hoursDESIGN AND IMPLEMENTATION OF AUTOMATED MOTOR VEHICLE DRIVING LICENSING SYSTEM
ABSTRACT
Considering the fact that our country is still developing, there are a lot to be done to improve the way information is processed in our licence wait before been attended to.
In view of this project work analyses the current procedure used in our motor licensing offices to issue licence to drivers renew expired licence legislation of vehicles and change of ownership of already registered motor vehicles.
The services of Uwani Motor licensing office can be enhanced by considering a computer based motor licensing information system taking advantage of computer networking computer speed, database, storage faculties telecommunication links, the retrieval of records without much interventions of the motor licensing office.
TABLE OF CONTENTCHAPTER ONE1.0 Introduction
1.1 Background of the study
1.2 Objective of the study
1.3 Statement of the problem
1.4 Justification of problem
1.5Project organization
CHAPTER TWO2.0 Literature Review
CHAPTER THREE3.0 Overview of the existing system
3.1 Description and Analysis of the existing system
3.2 Method of Data collection
3.21 Interview method
3.22 References to written text
3.23 Use of questionnaires
3.3 Input Analysis
3.4 Process Analysis
3.5 Output Analysis
3.6 Problems of the existing system
3.7 Justification for the new system
CHAPTER FOUR
4.0 Design of the new system
4.1 Input specification and design
4.2 Output specification and design
4.3 File design
4.4 Procedure chart
4.5 System flowcharts
4.6 System requirement
CHAPTER FIVE5.0 Implementation
5.1 Program design
5.2 Program flowchart
5.1 Pseudo code
5.2 Sources listing
5.3 Test run
CHAPTER SIX6.0 Documentation
CHAPTER SEVEN7.0 Recommendation and conclusion
Reference
CHAPTER ONE
1.0 INTRODUCTION
The motor vehicle licensing office is one of the departments under the board of internal revenue which is the arm of the state ministry of finance. The activities of the board are meant to generate revenue for the government. The motor licensing department are located at each of the local government area head quarters of the country.
The motor licensing offices at the local government area of the state are under the motor licensing office of the state. The daily transaction from which these revenues are generated include the following:
Registration Of Vehicles: This include the registration of both new imported second handed vehicles popularly known as (Tokumbo) and the ones bought from the government and its prostates.
After the registration an identification number is issued which is unique to the vehicle concerned. Such identification numbers serve as a mark to identify the origin of a particular motor.
For instance Anambra state is represented by (HOME FOR ALL) Abia is represented (GOD’S OWN STATE) Enugu with (Coal City) but this form of identification is above the scope of this project.
Issuance/ renewal of vehicle licences: licences are issued to newly registered cars. Also licence that has expired after the duration of six or twelve months are renewed.
After the renewal of licence badge is issued which is stocked on the car wind screen.
Change of ownership: This transaction affects only car, which has previously registered. That is cars which the initial owner has decided to dash out or sell to another person, in a situation like this registration of this vehicle will then be updated with respect to police extract indicating justice to right full owner.
OTHERS
- Learners permit
- Vehicle test for road worthiness
- Replacement of lost or defaced driving licence
Considering the important role played by this department. The introduction of computer will enhance their activities. Also it will reduce manual operation, increase accuracy easy access to date, and it will also help in the accounting for money generated by the department.
BACKGROUND OF THE STUDY
A study was undertaken to investigate the mode of operation in our licensing office and the difficulties encountered in executing their debs.
Consideration was based specifically on Uwani Motor vehicle Driving licensing office.
In the cause of investigation, it was discovered that customers has to wait endlessly before a driving licence is issued to them or before they renew the expired ones.
The current motor licensing management in Uwani Motor licensing office is very gloomy and innovative ways have to be found to get out of this perilous situation.
To achieve the improvements required, the concept in Uwani Motor vehicle licensing office need to be developed so as to get things done as effectively and efficiently as possible,
1.2 AIMS/OBJECTIVE OF THE STUDY
This research aims at improving the accuracy of information and data on all the transactions of wane motor licensing office to be precise.
Providing a means for effective and efficient system integration.
Reducing the cost of processing each unit of data.
For instance data on the registration of cars, issuance of licences, a data on change of ownership etc
Providing an easy and fast way of accessing and retrieving information.
Reducing the number of staff in specific administrative functions because of cost.
All this functions have been simplified and fully implemented when I was designing the new system which is a computer wed system whish is a computerized system.
1.21 STATEMENT OF THE PROBLEM
Motor licensing system demands for efficient service to attain the maximum requirement of their customers.
But due to the fact that man cannot work beyond his capacity, there is reduction in the total output of the existing organization. These are some of the inefficiencies that leads to the computerization of the existing system.
1. Inability of workers o keep accurate account of money generated.
2. Inadequate storage facilities.
3. Their speed of program execution and implementation is very low
4. Customers demand canned be efficiently and conveniently attained to.
5. Method of retrieving information is tedious and time wasting.
Due to these in competencies observed in the manual services, I was faced with the challenges of finding a way to alleviate this problems.
Therefore this exclusive project (software) has been design to take appropriate care of such problems listed above.
1.3 SCOPE OF THE STUDY
Since it is an academic exercise the project is restricted to Uwani Motor licensing office Enugu and is designed to handle only some of the activities of the department.
Namely:
i Change of ownership
ii Registration of vehicles
Iii Issuance and renewal of licences
iv. Report generation
v. Modification, display, deletion, addition of vehicle records
vi. Enquires
Also only some categories of vehicles can be handle for instance cars, pickups and mini buses.
The system was not design to handle special numbers like
- Government and parastatals vehicles.
- Armed forces and police vehicles
- Diploma and reserved numbers
Although the scope of the project is restricted to Uwani Enugu and certain customers, it could be modified to take care of other states and special numbers by addition and modification of the system
1.4 METHODLOGY
1. INTERVIEW: The researcher visited the licensing authority and interviewed the staffs in various areas and levels in the establishment
I also interviewed some of the customers I met during my visit.
The state motor licensing was the first person interviewed. He briefed me on the various services rendered by the establishment and later direct me to the financial controller and to other members of the establishment who seen to the day to day transaction and are in better position to get me informed on the shortcoming of the system.
2. OBSERVATION : In the cause of interviewing the staff, time was spent in their offices to see their mode of operation and how the existing system work
I also observed that information dissemination is very slow, though its effective.
3. REGRENCES TO WRITEN MATERIALS: In the cause of information mining the researcher made references to some written materials and find out the necessary information on motor licensing in Nigeria.
The information gathered here was used in writing the project
1.5 PROJECT ORGANIZATION
Chapter 1 - Introduction
Chapter 2 - Review of related literature
Chapter 3 - Descriptor and Analysis of the existing system
Chapter 4 - Design of the new system
Chapter 5 - Implementation
Chapter 6 - Documentation
Chapter 7 - Recommendation and conclusion
This material content is developed to serve as a GUIDE for students to conduct academic research
Delivery: Within 24 hours
Advertise Here
Not what you were looking for? Perform a search
What's your project topic?
Comment on Facebook:
Related Project Materials
- 1.
THE ROLE OF COMPUTERS IN FRAUD DETECTION AND PREVENTION IN THE NIGERIA BANKING INDUSTRY
THE ROLE OF COMPUTERS IN FRAUD DETECTION AND PREVENTION IN THE NIGERIA BANKING INDUSTRY CHAPTER ONE INTRODUCTION 1.1 PROBLEM IDENTIFICATION...More »
Item Type: Project Material | 55 pages | 0 engagements |
- 2.
THE ROLE OF COMPUTER IN FRAUD DETECTION AND PREVENTION
THE ROLE OF COMPUTER IN FRAUD DETECTION AND PREVENTION CHAPTER ONE INTRODUCTION The computer machine and computer technologies are both human oriented...More »
Item Type: Project Material | 54 pages | 0 engagements |
- 3.
STUDY OF THE USE OF COMPUTER IN MANAGEMENT INFORMATION SYSTEM
STUDY OF THE USE OF COMPUTER IN MANAGEMENT INFORMATION SYSTEM CHAPTER ONE INTRODUCTION Computer has become a very powerful tool in the business world ...More »
Item Type: Project Material | 59 pages | 0 engagements |
- 4.
ROLE OF THE LIBRARY IN THE UBIQUITOUS COMPUTER (INFORMATION TECHNOLOGY) ENVIRONMENT
ROLE OF THE LIBRARY IN THE UBIQUITOUS COMPUTER (INFORMATION TECHNOLOGY) ENVIRONMENT CHAPTER ONE INTRODUCTION I.1 BACKGROUND OF THE STUDY With the inve...More »
Item Type: Project Material | 55 pages | 0 engagements |
- 5.
ROLE OF MODERN TECHNOLOGY IN ACHIEVING COMMUNICATION EFFICIENCY IN NIGERIA
ROLE OF MODERN TECHNOLOGY IN ACHIEVING COMMUNICATION EFFICIENCY IN NIGERIA CHAPTER ONE INTRODUCTION 1.1 BACKGROUND OF THE STUDY This project is a...More »
Item Type: Project Material | 54 pages | 0 engagements |
- 6.
INFORMATION TECHNOLOGY AND SYSTEMS AUDIT
INFORMATION TECHNOLOGY AND SYSTEMS AUDIT CHAPTER ONE INTRODUCTION 1.1 BACKGROUND INFORMATION Information according to Information Systems Audit ...More »
Item Type: Project Material | 60 pages | 0 engagements |