1. EFFECT OF STEEPING PERIOD ON YIELD AND ACCEPTABILITY OF STARCH EXTRACTED FROM SO...

» ABSTRACT Starch was extracted from two varieties of sorghum bicolor grains (white and red varieties) steeped for 6, 8 and 12 hours by wet milling method, the starch samples were analysed for yield, functional properties and overall acceptability. The yield of the white variety ranged from 0.45 – 0.70kg and the red variety was 0.40 – 0.50kg. The result of their functional properties were as ...Continue Reading »

Item Type: Project Material | 65 pages | 14,304 engagements |

2. COMPARATIVE ANALYSIS OF PIPEBORNE WATER AND OTHER SOURCES OF WATER WITHIN ENUGU ...

» ABSTRACT Comparative analysis of water was carried out on well water, stream and pipe born water obviated within Emene locality of Enugu state the sample were subjected to some analytical tests final like presumptive tests, comfirmative test final like presumptive tests, comfirmative test, completed test, indole test and plate count for the organism that develop on the culture, the result...Continue Reading »

Item Type: Project Material | 65 pages | 8,053 engagements |

3. DESIGN AND CONSTRUCTION OF A REFRIGERATING UNIT

» ABSTRACT The design and construction of s refrigerating unit is handled from the knowledge of the working principles of laws of thermodynamics. The size of the containing vessel i.e the case as established to be of 45cm by 32 cm in dimension. The Angle iron mild steel to used in the fabrication and welding. The box case of two layers are fabricated....Continue Reading »

Item Type: Project Material | 65 pages | 8,046 engagements |

4. UTILIZATION STUDIES OF ENUGU COAL

» ABSTRACT This study has its theme as a utilization studies of Enugu coals with the view of studying its properties, classification, preparation storage etc comparing coals obtained from different locations. The Enugu coal is a sub bitummous and non coking coal. It is very rich in waxes and resins, thus it may be suitable for the production of liqu...Continue Reading »

Item Type: Project Material | 65 pages | 8,625 engagements |

5. CHARACTERIZATION OF SOME BRANDED MOTOR OIL

» ABSTRACT This project work, characterization of some branded motor oil was aimed at studying and analyzing the characteristics/properties of lubricating oils of various brands it also exphered the origin, properties, refining and exploration techniques of crude oil to produce variety of products such as liquid petrol, lubricating oil, waxes etc. Furthermore, physical tests or characterizatio...Continue Reading »

Item Type: Project Material | 65 pages | 8,321 engagements |

6. THE RATE OF BLEACHING OF PALM OIL WHITE COAL

» ABSTRACT This project was carried using activated local form local corporation Enugu, and the rate of bleaching of palm oil using spectrophotometer by measuring the absorbance. It was also performed to check the suitability of local as a bleaching agent for palm oil. The local from local corporation Enugu was collected and activated with acid (H2S04) before being used for the bleaching process....Continue Reading »

Item Type: Project Material | 65 pages | 8,695 engagements |

7. PRODUCTION OF PLANT MIRROR USING LOCAL RAW MATERIAL

» ABSTRACT This project “production of plane mirror using local raw material” is meant to study the possibility of producing plane mirror using sand rich in silica as its major local raw material. Plane mirror is produced by casting one side of a sheet glass. Presently in Nigeria, sheet glass is not used easily produce and as such, the local raw material used in the in the production of pla...Continue Reading »

Item Type: Project Material | 65 pages | 9,810 engagements |

8. FABRICATION OF CANDLE MOULD WITH TWENTY FOUR (24) HOLES

» ABSTRACT The candle mould has twenty four (24) holes which could produce twenty four (24) quality candle sticks Aluminum, a non ferrous metal was used as the construction material for the mould the type of casting technique used was green sand mould method. In the process of moulding the pattern was placed in the flask which contained the green sand. The flask was turned upside down and the r...Continue Reading »

Item Type: Project Material | 65 pages | 8,540 engagements |

9. CONSTRUCTION OF A SIMPLE SIZE REDUCTION MACHINE

» ABSTRACT This project (Construction Of A Simple Size Reduction Machine) It was constructed locally with the use of local materials and tools in I.M.T mechanical Engineering workshop. The various parts of the equipment were constructed separately using mild steel before finally coupled. During the construction, the conveyors and it’s housing were first constructed. It consists of a shaft w...Continue Reading »

Item Type: Project Material | 65 pages | 8,533 engagements |

10. FORMULATION AND PRODUCTION OF LEVERA SOAP

» ABSTRACT The production of the soap was carried out using all the necessary equipments like the reactor, mould, stirrer, hygrometer guage etc. and all the required reagents for soap production in correct proportion. In the production, palm kernel oil (P.K.O) was used instead of tallow or grease. This was because soap produced from grease or tallow tends to dissolve slowly at room temperature,...Continue Reading »

Item Type: Project Material | 65 pages | 10,677 engagements |

11. THE EFFECT OF LIQUID FLOERATE AND GAS FLOWRATE ON A PACKED ABSORPTION TOWER AND ...

» ABSTRACT The purpose of the project is to study the effect of liquid flow rate and gas flow rate on the pressure drop in a packed absorption tower and also to repair and restore the packed absorption tower to good working condition. Trouble shooting revealed that the exit drain value was broken due to carelessness on the part of former user of the equipment. We had to carry out glassblowing o...Continue Reading »

Item Type: Project Material | 65 pages | 7,709 engagements |

12. COMPARATIVE ANALYSIS OF COAL AND COCONUT ACTIVATED CARBON

» ABSTRCT The experiment was carried out to analyze comparatively coal and coconut activated carbon. The coal sample used in bituminous and with density of 1300kg 1m3 tile coconut shell was used. The coal and coconut shell was first activated using phosphoric acid. The activated coal and coconut carbons mere then used to bleach palm oil after preliminary treatment of the palm oil. The 10 di...Continue Reading »

Item Type: Project Material | 65 pages | 9,313 engagements |

13. THE USE OF LOCAL PIGMENTS AND EXTENDERS FOR FORMULATION AND PRODUCTION OF EMULSI...

» ABSTRACT The major aim of this project research work is to produce emulsion paint from locally sourced pigment & extenders. The materials used for the production was of local source. The major raw materials used for the production of the emulsion paint: water, titanium iv oxide, calcium carbonate, kaoline, calgon, natrosol, biocide P.V.A, ammonia, deformer (Ginap) kerosene, yellow iron oxide an...Continue Reading »

Item Type: Project Material | 65 pages | 12,151 engagements |

14. DESIGN AND OPERATION OF A SHELL AND TUBE HEAT EXCHANGER

» TABLE OF CONTENT CHAPTER ONE Introduction CHAPTER TWO 2.0 Literature Review 2.0.1 Classification of heat Exchanger 2.0.2 Categories of heat exchangers 2.0.3 Types of heat exchangers 2.0.4 Material for constructions 2.0.5 Tube shape and position 2.0.6 Firing 2.0.7 Heat so...Continue Reading »

Item Type: Project Material | 65 pages | 8,549 engagements |

15. CONSTRUCTION OF A PILOT MOTORISED MIXER

» ABSTRACT A motorized mixer of 200 liters capacity was constructed to have the capability of mixing 200 liters of fluid during operation. The construction of the mixer involves the preliminary measures and calculations on the surface area of the metal sheet. Some basic workshop practices was carried out during the construction such as the marking out of the metal sheet, cutting of different si...Continue Reading »

Item Type: Project Material | 65 pages | 7,934 engagements |

16. CONSTRUCTION OF A BLENDER

» ABSTRACT Blender is an electric machine for size reducing soft food or liquid mixture. Blender is some time called liquidizer consists of a glass jar or jug containing a steel blade assembly at the base driven by a small electric motor. Construction of blender was done based on the principle of size of reduction using electric motor as the major driver force. During the construction of blen...Continue Reading »

Item Type: Project Material | 65 pages | 10,609 engagements |

17. CONSTRUCTION OF INDUSTRIAL SIEVE COMPARTMENT

» ABSTRACT The construction of Sieve Industrial Sieve Compartment was carried out in the Engineering Workshop, Institute of Management and Technology, Enugu. The aim of this project is to fabricate an industrial sieve compartment which is capable of separating solid particles of various sizes. The construction was carried out in order to analyze the si...Continue Reading »

Item Type: Project Material | 65 pages | 7,966 engagements |

18. THE BLEACHING OF PALM OIL USING ACTIVATED CHARCOAL

» ABSTRACT This project work is on the bleaching of palm oil using activated charcoal. The charcoal used for this work was made from pieces of animal bone by carbonization method. It was then activated into two different samples. Firstly, the basic sample was activated using anaphoric acid (H2 s04) while the other was activated by just heating as a control for the experiment; both at a const...Continue Reading »

Item Type: Project Material | 65 pages | 11,608 engagements |

19. CONSTRUCTION OF INDUSTRIAL WHEEL BARROW

» ABSTRACT Wheel barrow can be defined as a simple machine used in transferring heavy loads materials from one place to another by pushing. It can be used or serve as farm equipment, industrial equipment and for other purpose. How ever, mateials used for the cnstruction of wheelbarrow are bought in standard sizes either in long bare eg for the handle or in st...Continue Reading »

Item Type: Project Material | 65 pages | 8,281 engagements |

20. A PROJECT REPORT ON CONSTRUCTION OF INDUSTRIAL SIEVE COMPARTMENT

» ABSTRACT The construction of Sieve Industrial Sieve Compartment was carried out in the Engineering Workshop, Institute of Management and Technology, Enugu. The aim of this project is to fabricate an industrial sieve compartment which is capable of separating solid particles of various sizes. The construction was carried out in order to analyze the si...Continue Reading »

Item Type: Project Material | 65 pages | 8,490 engagements |

21. PRODUCTION OF DOMESTIC POWDER

» ABSTRACT This research project is aimed at producing domestic powder and consequently, three different types of powder were produced, namely, simple face powder (pan cake), medicated/Antiseptic powder (dristing powder). During the various production Talcum, Zinc oxide, Perfume, Menthol, Tragasan 300 DP (Triclosan), Mineral oil and colour (brown) were the materials used in the production ...Continue Reading »

Item Type: Project Material | 65 pages | 10,506 engagements |

22. CONSTRUCTION OF 500 GALION (2250 LITRES) WATER RESERVOIR

» ABSTRACT The construction of the 500 gallous (2,250 litre) of water is a project which has definite mathematical patterns. The choice of a cylindrical pattern of design involved the application of mathematical deductions to analyse the size of materials required. The introductory and scope of the project emphasized the construction and installation ...Continue Reading »

Item Type: Project Material | 65 pages | 7,770 engagements |

23. CONSTRUCTION OF A "CHEMICAL RACK"

» ABSTRACT The project done was a metal chemical rack. The rack was made of steel, which is soft to cutting, blending and several other operations applied to the metal during construction. The main purpose of constructing this metal rack is to be used for storing chemicals in the laboratory for easy accessibility and safe keeping. The to tal cost of the constructional project was estimated at the...Continue Reading »

Item Type: Project Material | 65 pages | 7,856 engagements |

24. CONSTRUCTION OF A METAL RACK

» ABSTRACT This project report is on the construction of a metal rack which can be put to use in laboratories, industries, shops, kitchens, and also for displaying various articles. The construction work was done in a mechanical work shop. Racks are of various types which concides with the numerous uses to which they are applied. Some types of racks includes wooden racks and metal. The metal rack wa...Continue Reading »

Item Type: Project Material | 67 pages | 8,232 engagements |

25. CONSTRUCTION OF A JUICE EXTRACTOR MACHINE

» ABSTRACT A Juice extractor machine is a device that is used to extract liquid (Juice) from fruits and vegetables in a process called juicing. The machine is constructed manually with the use of local materials and tools. The material used for the construction of the machine is mild steel sheet. During the construction of the machine, the various parts of it were constructed sep...Continue Reading »

Item Type: Project Material | 65 pages | 11,513 engagements |

What's your project topic?

Items In Project Materials Listing | Final Year Research Project Topics & Materials In PDF & Doc | iproject