What's your project topic?

Electrical Engineering Project Topics & Research Materials | Final Year Research Project Topics With Free Chapter One

• 1. AN INVESTIGATION INTO THE CONSEQUENCES OF OVER LOADING A TRANSFORMER

  » AN INVESTIGATION INTO THE CONSEQUENCES OF OVER LOADING A TRANSFORMER   CHAPTER ONE INTRODUCTION Background of the study Transformers play a crucial role in the electrical power distribution system, facilitating the efficient transfer of energy by increasing and decreasing voltages. The normal service life of a transformer is the standard duration of continuous operation under typical environmenta...Continue Reading »

  Item Type: Project Material |  54 pages |  1,771 engagements | 

• 2. THE ROLE OF ELECTRICITY TARIFF HIKES IN PROMOTING RENEWABLE ENERGY ADOPTION IN N...

  »   CHAPTER ONE INTRODUCTION Background of the Study Renewable energy is energy derived from natural sources that are replenished at a higher rate than they are consumed. It is also referred to as clean energy (NRDC, 2022). There are different types of renewable energy sources which includes; solar energy, wind energy, geothermal energy, hydropower, bioenergy and ocean energy (NRDC, 2022). Renewabl...Continue Reading »

  Item Type: Project Material |  54 pages |  1,310 engagements | 

• 3. AN ASSESMENT OF THE NATIONAL GRID FAILURES AND THE WAY FORWARD

  » CHAPTER ONE INTRODUCTION 1.1 Background of the study Electricity has become an essential element of contemporary life worldwide, serving various purposes such as employment, transportation, communication, healthcare, education, and daily living activities including lighting, cooking, and temperature control. (Adeyemi, 2019). Consequently, the absence of electricity, or its insufficient provision, ...Continue Reading »

  Item Type: Project Material |  54 pages |  1,442 engagements | 

• 4. IMPACT OF FORMAL EDUCATION ON COMMUNITY DEVELOPMENT IN OREDO LOCAL GOVERNMENT, E...

  » ABSTRACT The broad objective of this study is to examine the impact of formal education on community development in Oredo Local Government, Edo State. The study adopted the survey descriptive research design and with the aid of convenience sampling method, the researcher purposively selected one hundred and fifty (150) participant for the study. Self structure questionnaire was issued to the respo...Continue Reading »

  Item Type: Project Material |  54 pages |  6,961 engagements | 

• 5. CONSTRUCTION OF CRITICAL TEMPERATURE ALARM SYSTEM

  » ABSTRACT The term “critical point” is sometimes used to denote specifically the vapour liquid critical point of a material. The vapour liquid   point denotes the condition above which distinct liquid and gas phases so not exist. The project, the construction of critical temperature measuring instrument is aimed at measuring the critical point substances thereby obtaining its liquid vapour cr...Continue Reading »

  Item Type: Project Material |  46 pages |  13,037 engagements | 

• 6. THE CONSTRUCTION OF LABORATORY EQUIPMENT FOR THE DETERMINATION / INVESTIGATION O...

  » ABSTRACT Insulation deterioration occurs on power system when insulators are subjected to abnormal stresses. Since insulators cannot resist indefinite amount of energy, with enough voltage applied, any insulating material will eventually succumb to the electrical pressure and electron flow will occur and once current is forced through an insulating material, breakdown of that material’s molecula...Continue Reading »

  Item Type: Project Material |  31 pages |  8,913 engagements | 

• 7. CONSTRUCTION OF 2000W AUTOMATIC VOLTAGE REGULATOR

  » ABSTRACT This project is all about Automatic Voltage Regulator (AVR), and is a circuit that monitors the input voltage at any point and display the regulated voltage level on the analog meter. It is mainly for electrical/electronic system that is delicate to abnormal voltage level. It is usually connected as an intermediary between voltage supply and appliance. The Automatic Voltage Regulator (AVR...Continue Reading »

  Item Type: Project Material |  50 pages |  12,687 engagements | 

• 8. DESIGN AND CONSTRUCTION OF AN ELECTRICAL ROBOTIC TRAIN;THE CONTROL SYSTEM DRIVE(...

  » 1.0  Introduction     A         robot is a computer controlled machine that can be programmed to move, manipulate objects and accomplish work while interacting with its environments and a train or locomotive any type of self propelled vehicle used by railroads to pull or push other types of rolling stock, including passenger, freight, and work cars. The locomotive differs from other kin...Continue Reading »

  Item Type: Project Material |  34 pages |  9,476 engagements | 

• 9. THE ELECTRICAL DESIGN AND INSTALLATION REQUIREMENT FOR A MEGA FILLING STATION

  »   ABSTRACT A mega filling station can be described from its name –MEGA; which means larger in size. This implies that mega filling station is a large scale fuel station outlets where fuels of various forms are sold. A typical example is the NNPC MEGA FILLING STATION in the various states of Nigeria. Each of the NNPC MEGA FILLING STATION has twenty fuel dispensers while that of Abuja has twenty ...Continue Reading »

  Item Type: Project Material |  55 pages |  14,762 engagements | 

• 10. DESIGN AND CONSTRUCTION OF AC VOLTMETER USING COMPUTER INTERFACE

  »       ABSTRACT   Voltage is a fundamental quantity that is important in every phase of electrical engineering from power system to voltage inside VLSI chips. Of The need to measure the output voltage of a supply is very important meanwhile, The voltmeter is an instrument for measuring voltage, it could be digital or Direct voltage, meanwhile, the rectification process of the alternating voltag...Continue Reading »

  Item Type: Project Material |  32 pages |  9,195 engagements | 

• 11. CONSTRUCTION AND DESIGN OF POLICE SIREN

  » TITTLE PAGE BY (NAME HERE) (MAT NO HERE) A PROJECT WORK SUBMITTED TO THE DEPARTMENT OF PHYSICS, FACULTY OF SCIENCE, MICHIGAN UNIVERSITY, NEW YORK. IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE AWARD OF B.Sc (HONS). DEGREE IN ELECTRONIC ENGINEERING (PHYSICS AND APPLIED ELECTRONICS ENGINEERING) CERTIFICATION I certify that the project work was carried out by Ogodo Akpezi Alex and Samson Timipa...Continue Reading »

  Item Type: Project Material |  38 pages |  15,078 engagements | 

• 12. DESIGN AND CONSTRUCTION OF AUTOMATIC SOLAR STREET LIGHT

  » ABSTRACT In this project work, we are mostly concern about building a simple power streetlight which is automatically operated. There are four main components required to build a solar operated streetlight. The solar array, High efficiency D.C lamp section made by transistor, resistors, and the sensor LDR, changes controller which is made up of diode, resistors, LED, capacitor, and a battery of wh...Continue Reading »

  Item Type: Project Material |  41 pages |  30,657 engagements | 

• 13. DISTANCE PROXIMITY SENSOR

  » ACKNOWLEDGEMENTS Thanks to God Almighty, the source and supplier of all potential, the father of all creation for the privilege to go through my first degree without Him, nothing would have been accomplished. My sincere and profound gratitude goes to my affectionate parent, Mr. & Mrs. Iserijeri and my siblings for their moral, spiritual and financial support. May the good Lord bless you all. S...Continue Reading »

  Item Type: Project Material |  38 pages |  11,183 engagements | 

• 14. CONSTRUCTION AND DESIGN OF 1.5KVA INVERTER

  » DEDICATION I dedicate this project work to Almighty God, the source of all knowledge, wisdom and understanding, for being there for me throughout the period of my study and to my lovely parents, Mr. and Mrs. (write name here) for their parental care, who has always been my inspiration. TABLE OF CONTENT CHAPTER ONE===================================1 INTRODUCTION==================================1 ...Continue Reading »

  Item Type: Project Material |  32 pages |  12,464 engagements | 

• 15. CONSTRUCTION AND DESIGN OF BATTERY LEVEL INDICATOR CIRCUIT

  » ABSTRACT Technology on batteries has advanced over the years as a result of the need to power portable devices that have risen in numbers in the last decade. Just like primary cells, rechargeable batteries work in the same way, only their chemical reactions are reversible. This project aimed at building a system that would indicate the capacity level of a Nickel Metal Hydride battery upon charging...Continue Reading »

  Item Type: Project Material |  31 pages |  20,816 engagements | 

• 16. CONSTRUCTION AND DESIGN OF TRAFFIC LIGHHT

  » DEDICATION We dedicate this project work to Almighty God, the source of all knowledge, wisdom and understanding, for being there for us throughout the period of our study and to our lovely parents, Mr. and Mrs. Abido, and Sir & Lady Christopher Korugbo for their parental care, who has always been our inspiration. ACKNOWLEDGEMENTS Thanks to God Almighty, the source and supplier of all potential...Continue Reading »

  Item Type: Project Material |  41 pages |  8,755 engagements | 

• 17. DESIGN AND IMPLEMENTATION OF BURGLAR ALARM SYSTEM

  » ABSTRACT As the world is developing the need for electronics in human endeavor is now taking a larger scope. With the invention of certain electronics gadgets in our societies today, certain activities become easily handled for example; in communication where the telephone plays a part.  In places where safety are needed an alarm system will be of much important.   The application of electronics...Continue Reading »

  Item Type: Project Material |  50 pages |  12,225 engagements | 

• 18. DESIGN AND CONSTRUCTION OF FIRE ALARM SYSTEM IN A TWO STOREY BUILDING

  » TABLE OF CONTENT Title page Approval page Dedication Acknowledgement CHAPTER ONE – INTRODUCTION Background of problem Structure of the problem Objective of the study Scope and limitation Importance of the study Definition of terms Design of the system Layout for the construction CHAPTER TWO CHARACTERISTICS OF THE COMPONENTS 5a fused, 3 pin pole plug Isolation and switching A.c. contactors Th...Continue Reading »

  Item Type: Assignment |  41 pages |  14,539 engagements | 

• 19. AUTOMATIC PUMP CONTROL WITH WATER LEVEL MONITOR AND DIGITAL DISPLAY

  » Automatic water level controller for both overhead and underground tank is designed to monitor the level of water in a tank. It displays the level of water and when it is at the lowest level; a pump is activated automatically to refill the tank. When the tank is filled to its maximum capacity, the pump is automatically de energized. Several circuits are put together to ensure proper working of thi...Continue Reading »

  Item Type: Project Material |  54 pages |  15,479 engagements | 

• 20. DESIGN AND CONSTRUCTION OF A TRANSMITTER

  » ABSTRACT This project as the name implies is chosen, designed and constructed with the intention of transmitting information such as musicals news entertainments programs and so on. And all these that are written above are being transmitted to the atmosphere using an electromagnetic, signal, and this particular project design and construction is exactly the type of electronics, instrument that are...Continue Reading »

  Item Type: Project Material |  31 pages |  9,549 engagements | 

• 21. DESIGN AND CONSTRUCTION OF A MULTIPERPOSE SECURITY SYSTEM WITH ALARM AND DISPLAY

  » ABSTRACT   This project report is a thesis written specifically to cover the design analysis construction, test and packaging of a multipurpose security system from electric component that can be easily be obtainable from the market. The report discusses the various unit and stages of the alarm system, thesis include: a) Clock generation and frequency division unit. b) The control and section uni...Continue Reading »

  Item Type: Project Material |  65 pages |  10,957 engagements | 

• 22. DESIGN AND CONSTRUCTION OF POWER AMPLIFIER

  » PREFACE The aim of this project is to construct power amplifier.  The system is expected to amplify.  The major components in the circuit is the integrated circuit (IC JRE with some circuit elements for the normal operation of the circuit.  So as to amplifier an output, the general construction dealt with in the chapters. The levels of treatments presuppose a detailed knowledge of electronics a...Continue Reading »

  Item Type: Project Material |  65 pages |  9,254 engagements | 

• 23. DESIGN AND CONSTRUCTION OF AN AUDIO AMPLIFIER

  » ABSTRACT   The topic of this project is " Audio Amplifier". The research embarked upon this study or project by using both primary and secondary source of data. The main instrument used for data collection are: Modern electronics circuit Design. By David J. Commer. Electronics Devices. By Floyd Electrical Installation Theory and Practice. By Dennelly E.L. Electronics IV. By Dr. Green Electronics ...Continue Reading »

  Item Type: Project Material |  65 pages |  12,370 engagements | 

• 24. DESIGN AND CONSTRUCTION OF VOLTAGE INVERTER SYSTEM WITH TRICKLE CHARGING SYSTEM

  » ABSTRACT This project is he design and construction of a voltage inverter system with trickle charging system. This device is design to provide power supply for the need of offices, household etc. In absence of NEPA power supply. It would also prevent harm to our appliances caused by power holding company LTD (NEPA) Random power outage .   TABLE OF CONTENT Title Page Approval Page Dedication Ackn...Continue Reading »

  Item Type: Project Material |  65 pages |  8,688 engagements | 

• 25. THE DESIGN AND IMPLEMENTATION OF AN ELECTRONIC SIGN PATTERN DISPLAY

  » ABSTRACT   This design implementation of this electronic sequential sign post display employs the use of some specialized components. This section of the project introduces the reader to the different section of the project and the components that makes them up. Emphasis are laid on describing the behaviour and operational system of the components as related to the project modeling, analysis, des...Continue Reading »

  Item Type: Project Material |  65 pages |  7,414 engagements |