What's your project topic?

Mechanical Engineering Project Topics & Research Materials | Final Year Research Project Topics With Free Chapter One

• 1. RECTIFICATION AND REPAIR OF A FAULTY AIR CONDITIONER

  » ABSTRACT   In the mechanical Engineering department of institute of management and technology there and many machines but not all in are good shape or form. This may be due to inadequate maintenance, which is evident in the breakdown of air conditioner. In the case of machine maintenance, the quality and effusiveness of material were well noted. Also not left behind was the cost of maintenance wh...Continue Reading »

  Item Type: Project Material |  65 pages |  4,367 engagements | 

• 2. REPAIR AND MAINTENANCE OF A FAULTY DEEP FREEZER

  » ABSTRACT   Mechanical Engineering Department of the Institute of Management and Technology has many non – functional machines. This is caused as a result of poor maintenance culture, which in turn resulted to breakdown of the  Deep Freezer under review. Quality and effectiveness of machine maintenance were observed. A minimized cost of  maintenance and high Technology of repair were also ad...Continue Reading »

  Item Type: Project Material |  65 pages |  0 engagements | 

• 3. REPAIR AND REHABILITATION OF FAUTY AIR CONDITIONER

  » ABSTRACT The need for an authentic and reliable report relating to the repairs and rehabilitation of a faulty air conditioner is inevitable. The fact that many people use the air conditioner to cool the temperature in their respective home and offices make its maintenance a top priority to every individual in order to avoid huge expenditure in the repairs of the system. This report gives insight i...Continue Reading »

  Item Type: Project Material |  10 pages |  4,357 engagements | 

• 4. THE DESIGN AND FABRICATION OF MECHANICAL LAWN MOWER

  » CHAPTER ONE   INTRODUCTION In this pass, cutting of grasses in the school, track or filed, Industries hotel, public centers, Agriculture lands etc. was done by machete or cutlass. This method of manual cutting not only was laborious but also time consuming as it is human effort that is entirely needed both for cutting and motion. There was also inaccuracy in cutting level of the each inaccuracy i...Continue Reading »

  Item Type: Project Material |  65 pages |  6,622 engagements | 

• 5. FABRICATION OF A STANDARD WHEEL BARROW

  » ABSTRACT The project is about fabrication of wheel barrow which is fabricated in mechanical Engineering workshop in institute of management and technology, Enugu. The report comprise five chapters, chapter one is about the introduction (background of the study) of the wheel barrow, chapter tow is about the literature review, chapter three is about the theory and analysis of problem, chapter four i...Continue Reading »

  Item Type: Project Material |  65 pages |  6,374 engagements | 

• 6. DESIGN AND CONSTRUCTION OF MITCHELL TILTING PAD APPARATUS

  »   CHAPTER ONEINTRODUCTIONThe Mitchell tilting pad apparatus is a hydrodynamic measuring instrument developed in the early 1880’s in the laboratory of Beauchamp Tower in England. Tower was employed to study the friction in railway journal bearings and come up with the best method of lubricating them. The Mitchell tilting pad apparatus is used broadly in two different experiments namely;1) Determ...Continue Reading »

  Item Type: Project Material |  65 pages |  3 engagements | 

• 7. THE DESIGN AND FABRICATION OF MECHANICAL

  » CHAPTER ONE   INTRODUCTION In this pass, cutting of grasses in the school, track or filed, Industries hotel, public centers, Agriculture lands etc. was done by machete or cutlass. This method of manual cutting not only was laborious but also time consuming as it is human effort that is entirely needed both for cutting and motion. There was also inaccuracy in cutting level of the each inaccuracy i...Continue Reading »

  Item Type: Project Material |  65 pages |  5,125 engagements | 

• 8. THE DESIGN AND FABRICATION OF AUTONOMOUS POLYMER-BASED

  » CHAPTER ONE   INTRODUCTION We have participated indeed in mass shelling of corn using the most primitive. Cumbersome and difficult method of hand shelling, which encourages time consuming, and human stressfulness. Corn otherwise known as “Oka” in Igbo tribe is mostly used seed across all the tribe in country today. It is widely used in homes, hotels and schools for eating and seeding process ...Continue Reading »

  Item Type: Project Material |  65 pages |  4,433 engagements | 

• 9. CONSTRUCTION OF TWO FACE GAS BURNER CONSTRUCTION OF TWO FACE GAS BURNER

  » ABSTRACT             This project which is on the design and fabrication of a two face gas burner is a brief exploration on the various ways and means of designing, construction, operating the two face gas burner, putting cost into consideration for economic advantage.  Herein are brief information and literature on gas burner.  The properties of the constructional feature and their...Continue Reading »

  Item Type: Project Material |  65 pages |  6,477 engagements | 

• 10. DESIGN AND CONSTRUCTION OF A SPIN DRYER

  » ABSTRACT This work is aimed at designing and fabricating a spin dryer which can be used in drying spent grains after brewing. This will no doubt save considerable human labours and time wastage involved in conventional method of drying the spent grains by spreading on the ground. It also saves as a means of employments for our teaming population. This machine was designed after due consideration o...Continue Reading »

  Item Type: Project Material |  65 pages |  276 engagements | 

• 11. DESIGN AND FABRICATION OF A PILOT PRODUCTION PLANT

  » ABSTRACT             The concept of this project is to actualize a practical way of paint production using a locally design mixing machine which is design to meet a low cost and high standard paint.           The project cut across all forms of engineering, such as mechanical machine design of a simple industrial mixer, which is driven by an electrically made device, a 3 HP el...Continue Reading »

  Item Type: Project Material |  65 pages |  4,386 engagements | 

• 12. REPAIR AND REHABILITATION OF A FAULTY AIR CONDITIONER

  » ABSTRACT The need for an authentic and reliable report relating to the repairs and rehabilitation of a faulty air conditioner is inevitable. Many homes and offices use the air conditioner to cool he temperature in their respective homes. So, the maintenance of the air conditioner should be a top priority of every individual in order to avoid huge expenditure in the repairs of the system. It’...Continue Reading »

  Item Type: Project Material |  50 pages |  0 engagements | 

• 13. REPAIR OF A DAMAGED REFRIGERATOR

  » ABSTRACT   Mechanical Engineering Department of the named institute has many has non operational machines sequel to the fact, maintenance was poorly executed which resulted to the breakdown of this refrigerator. Quality and effectiveness of machine maintenance were well observed.  Also, a minimized cost of maintenance and a highly successful repair was adopted. In otherwords, during the repair ...Continue Reading »

  Item Type: Project Material |  65 pages |  4,502 engagements | 

• 14. REPAIR OF A DAMAGED AIR CONDITIONER IN ENGR. AYOGU AND OKPE

  » ABSTRACT This project is basically on the repair of a damaged air conditioner. It is intended to provide a break through in the restoration of any damaged air conditioner and thereby curtail the huge expenses incurred in the replacement of the entire unit. This report covers an introduction into what an air conditioner is all about, it’s historical background and working principle. A view on...Continue Reading »

  Item Type: Project Material |  31 pages |  4,326 engagements | 

• 15. DESIGN AND EVALUATION OF PEDIATRIC GAIT REHABILITATION ROBOTS

  » Abstract Gait therapy methodologies were studied and analyzed for their potential for pediatric patients. Using data from heel, metatarsal, and toe trajectories, a nominal gait trajectory was determined using Fourier transforms for each foot point. These average trajectories were used as a basis of evaluating each gait therapy mechanism.   An existing gait therapy device (called ICARE) previousl...Continue Reading »

  Item Type: Project Material |  65 pages |  4,424 engagements | 

• 16. FABRICATION FOR A SET OF SIEVES AND SAKER

  » ABSTRACT The fabrication of a set of sieves and shaker was carried out in paliton workshop, Enugu. After a thorough analysis on the suitable materials to be used in fabrication, galvanized steel was chosen due to its advantages over materials of fabrication. The fabrication was carried out in order to analyze the sizes of particles. The component parts of the sets of sieve and their dimensions are...Continue Reading »

  Item Type: Project Material |  65 pages |  4,926 engagements | 

• 17. DESIGN AND FABRICATION OF AN ELECTRIC POPCORN FRYING MACHINE

  » CHAPTER ONE 1.1 INTRODUCTIONNigeria’s economy has suffered a terrible setback over the year the common man finds it difficult to make for his livelihood, some people take pop corn as one of their favorite food especially bachelors spinsters who can take pop corn as super, breakfast and even lunch. The University and Polytechnics graduate no longer find good employment thereby embarks on self...Continue Reading »

  Item Type: Project Material |  33 pages |  7,551 engagements | 

• 18. ELECTRIC POP CORN MACHINE

  » ABSTRACT An electric popcorn machine is machine that is used to popcorn for human consumption. It uses electricity as it sources of energy, transfer it energy, that is used to pop the Corn. Also it has a stirrer, which rotate due to the convection of electrical energy from the source to mechanical energy in the motor, the stirrer tons the corn so that it will not burns. This project went as far a...Continue Reading »

  Item Type: Project Material |  65 pages |  4,564 engagements | 

• 19. CONSTRUCTION OF A POTABLE ELECTRIC OPERATED WITH RADIO CONTROL WIRELESS REMOTE M...

  » ABSTRACT Construction of a potable electric operated motor vehicle for long Volvo Bus. In this project involves the knowledge of mechanical engineering workshop technology and engineering material science and strength.This was exactly what we were taught. We contracted the electric car with the actual dimension of long Volvo bus(Ml ) got from the catalogue and we enlarged the scale by 1: 8mm. alum...Continue Reading »

  Item Type: Project Material |  65 pages |  4,524 engagements | 

• 20. AUTOMOBILE MOTOR VEHICLE CONSTRUCTION

  » ABSTRACT This work is an attempt evolve a quicker and easier method of achieving Transportation. This will no doubt save considering human labour and time wasted involved in traditional manual method of transportation.To achieve this, preliminary experiment was first carried out to determine the optimum speed of the motor vehicle. Various design alternative s for achieving the design solution were...Continue Reading »

  Item Type: Project Material |  65 pages |  5,195 engagements | 

• 21. CONSTRUCTION AND FABRICATION OF A CANDLE MOULDING MACHINE

  » ABSTRACT The candle molding machine is a vital device which cannot be done without, in any nation. This is because of the indispensable role candle plays, especially when there is no either source of light.In order to enhance adequate supply to both urban and rural consumers, the production of a candle molding machine is important.The major component of the candle molding machine are: the castled ...Continue Reading »

  Item Type: Project Material |  65 pages |  6,740 engagements | 

• 22. CONSTRUCTION OF SIEVE EQUIPMENT

  » ABSTRACT The sets of seizes with shocker which was fabricated and assembled in the chemical engineering pilot plant was aimed at providing the students with a machine that will aid them in practical involving the separation of solid particles. Besides this, it was also fabricated sizes or diameter of the solid particles of a substance by allowing it pass through the pores or aperture of the sieve ...Continue Reading »

  Item Type: Project Material |  65 pages |  5,692 engagements | 

• 23. CONSTRUCTION AND FABRICATED OF A MOBILE DEEP FREEZER

  » ABSTRACT This work on the construction and fabrication of a mobile deep freezer revolves around the concept of refrigeration. The concept of refrigeration revolves around the reverse Carnot cycle. This is a cycle involving isentropic expansion (at the throttling valve), isothermal expansion (at the evaporator), isentropic compression (at the compressor) and isothermal compressor ( at the condenser...Continue Reading »

  Item Type: Project Material |  65 pages |  4,698 engagements | 

• 24. NYLON CUTTING AND SEALING MACHINE

  » ABSTRACT This Nylon sealing and cutting machine has an added advantage of making 800 sealed bags per hour. The constructional machines were sourced locally.The machine can cut and seal Nylon at a affordable cost. The constructional size of 31 cm x 7.5cm x 12.4 which comprises the following component. The sealing and cutting filament, the transformer with 1000 turns of wire for the secondary and ab...Continue Reading »

  Item Type: Project Material |  65 pages |  13,662 engagements | 

• 25. REPAIR OF DEEP FREEZER IN MECHANICAL ENGINEERING DEPARTMENT

  » ABSTRACT This work gives an account of all activities carried out to restore a faulty and abandoned deep freezer to normal functioning. This report therefore contains the different stages embarked in the execution of the project. These include the literature back ground, checking’s conducted, cleaning, repair operations and replacement of some pants.The project was subsequently assembly and test...Continue Reading »

  Item Type: Project Material |  65 pages |  4,452 engagements |