What's your project topic?

Mechanical Engineering Project Topics & Research Materials | Final Year Research Project Topics With Free Chapter One

• 1. DESIGN AND FABRICATION OF A MOBILE DEEP FREEZER

  » ABSTRACT   This write up is a defeat of the process and formulation of plans for the physical realization of the construction of a mobile deep freezer. It is divided in chapters which discussed extensively on the practical refrigeration system with full attention given design factors, working principle and choice of material. It is strongly believed that this will make and interesting study for i...Continue Reading »

  Item Type: Project Material |  65 pages |  5,130 engagements | 

• 2. THE CONSTRUCTION AND FABRICATED OF A MOBILE DEEP FREEZER

  » ABSTRACT   This work on the construction and fabrication of a mobile deep freezer revolves around the concept of refrigeration. The concept of refrigeration revolves around the reverse Carnot cycle. This is  a cycle involving isentropic expansion (at the throttling valve), isothermal expansion (at the evaporator), isentropic compression (at the compressor) and isothermal compressor ( at the cond...Continue Reading »

  Item Type: Project Material |  65 pages |  4,385 engagements | 

• 3. DESIGN AND FABRICATION OF AN ELECTRIC STOVE AND OVEN

  » ABSTRACT   In this project (3) alternative design solutions were considered for the locally made electric run. The authors utilize the available local raw demerits of each alternative with respect to the considered group were discussed and the solutions of the alternative that best satisfied the limitations was selected for production. Material selection, design and cost of analysis, production p...Continue Reading »

  Item Type: Project Material |  65 pages |  7,359 engagements | 

• 4. CONSTRUCTION OF A BENCH SHAPING MACHINE

  » PREFACE   Our purpose of embarking on the construction of a project of this kind to present a very vivid and understandable fact that if given the necessary supports that we the youths and engineers in potential can move this country forward as regards to technical know how. Such a bird eye view right from time immemorial had proved that lot of time and money has been wasted without any reason. M...Continue Reading »

  Item Type: Project Material |  65 pages |  4,329 engagements | 

• 5. THE DETAIL FABRICATION OF A CANDLE MOULDING MACHINE

  » ABSTRACT   The fabrication of this candle moulding machine was based on creative activity, which entailed integrated knowledge and application of material science, strength of material, property of material and elements of design.  However, this project offered us the opportunity to use a great wealth of experience, intuition, ingenuity and aptitude test to produce a system useful to the society...Continue Reading »

  Item Type: Project Material |  65 pages |  4,181 engagements | 

• 6. RECTIFICATION AND REPAIR OF A FAULTY AIR CONDITIONER IN THE MECHANICAL ENGINEERI...

  » ABSTRACT In the mechanical Engineering department of institute of management and technology there and many machines but not all in are good shape or form.This may be due to inadequate maintenance, which is evident in the breakdown of air conditioner. In the case of machine maintenance, the quality and effusiveness of material were well noted. Also not left behind was the cost of maintenance which ...Continue Reading »

  Item Type: Project Material |  33 pages |  3,981 engagements | 

• 7. DESIGN AND CONSTRUCTION OF METALLIC BOOKSHELF

  » ABSTRACT Books are used recording of what is happening or event that has already taken place which can be storing information it is useful and for the information that such books contained not to cost it support to be properly kept and these can be done when those books are kept in a cool dry place and a place free from rodents and insects attacked Therefore, our contribution to proper storage of ...Continue Reading »

  Item Type: Project Material |  27 pages |  4,565 engagements | 

• 8. FABRICATION OF METALLIC BOOKSHELF

  » ABSTRACT  In our society today reading and writing has taken its roll as a way of measuring human knowledge.  Knowledge could only be obtain successively by the use of books for research but unfortunately because of hard time, books have because very expensive. This has called for preservation of books already purchased, whether in the public library school or in the house hold so that it can u...Continue Reading »

  Item Type: Project Material |  65 pages |  6,788 engagements | 

• 9. THE EFFECT OF WEIGHT PERCENTAGE OF SILICON CARBIDE ON MECHANICAL BEHAVIOR OF ALU...

  » INTRODUCTION The rapid development in the automobile and aircraft industries requires among other things, the integration of unique materials for design purposes that reduce fuel consumption to preserve the dwindling hydrocarbon resources without compromising other attributes such as safety, performance, recyclability and cost. Similarly, the current trend of materials in car industry is towards r...Continue Reading »

  Item Type: Project Material |  65 pages |  5,200 engagements | 

• 10. EFFECT OF WELDING CONSUMABLES ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF...

  » ABSTRACT Steel is arguably the world’s most ‘advanced” material. It is a very versatile material with a wide range of attractive properties which can be produced at a very competitive cost. It has a diverse range of applications, and is second only to concrete in its annual production tonnage. Steel is not a new invention which leads to a common misperception that “everything is known ab...Continue Reading »

  Item Type: Project Material |  65 pages |  5,801 engagements | 

• 11. MECHANICAL PROPERTIES OF AN ALUMINIUM OR SILICON CARBIDE COMPOSITE CONNECTING RO...

  » ABSTRACT Metal Matrix Composites (MMC’s) have evoked a keen interest in recent times for potential applications. Composite materials like Particle reinforced Aluminium Silicon carbide (Al/SiC) Metal Matrix Composite is gradually becoming very important materials in manufacturing industries e.g. aerospace, automotive and automobile industries due to their superior properties such as light weight,...Continue Reading »

  Item Type: Project Material |  65 pages |  5,062 engagements | 

• 12. DESIGN AND CONSTRUCTION OF A TWO-WHEEL MOTORIZED SCOOTER

  » ABSTRACT In recent years, there have been increasing government and public interest in energy issues generally and particularly in electro mobility. This is so because of the increasing effect of fossil fuels burnt by the automobile on the natural environment as well as on human health. A research carried out by (Ojolo S.J. et al, 2017) on the effect of vehicles emissions on human health in Nigeri...Continue Reading »

  Item Type: Project Material |  65 pages |  5,721 engagements | 

• 13. DESCRIPTION OF COOLING MECHANISMS USING WATER JET IMPINGEMENT AS APPLIED TO RUN-...

  » ABSTRACT This seminar work is on the description of run out table system in water jet impingement cooling of hot steel plate. The cooling mechanisms using water jet impingement as applied to run out table in steel industry. In this seminar work, the diagram of water jets impinging on a moving surface within the flow rate region of Run Out Table (ROT) process has been described and analyzed.   1. ...Continue Reading »

  Item Type: Project Material |  65 pages |  5,264 engagements | 

• 14. THE IMPACT OF JET APPARATUS

  » ABSTRACT This project is focused on experimental analysis of impact of water jet on vanes. This work intends to predict the output of a pelton wheel, and to determine its optimum rotational speed. Hence this work explains how the deflection of the jet generates a force on the buckets, and how the force is related to the rate of momentum flow in the jet. In this experiment, we measure the force gen...Continue Reading »

  Item Type: Project Material |  65 pages |  15,923 engagements | 

• 15. DESIGN AND MANUFACTURE A FUEL LESS GENERATOR

  » INTRODUCTION 1.1         BACKGROUND OF STUDY           The knowledge you are about to learn is a serious combination of an engineering trend. And have something to do with the ALTERNATOR.             Here, we make use of a D.C .Motor (direct current motor), and it has two terminals. This D.C.Motor, have the capacity to generate 12volts and be use for practical alterna...Continue Reading »

  Item Type: Project Material |  65 pages |  21,604 engagements | 

• 16. DESIGN AND CONSTRUCTION OF 2.5KG WEIGHT BENCH VICE

  » CHAPTER ONE   DESIGN AND CONSTRUCTION OF 2.5 KG WEIGHT BENCH VICE   INTRODUCTION A vise (American) or vice (British) is amechanical device used to secure anobject to allow work to be performed onit. Vices have two parallel jaws, one fixedand the other movable, threaded in andout by a screw and lever.   DESCRIPTION OF ABENCH VICE       A bench vice is like an extra hand. Itspurpose is to ho...Continue Reading »

  Item Type: Project Material |  65 pages |  10,464 engagements | 

• 17. CONSTRUCTION OF A MOBILE REFRIGERATOR FRIDGE

  » ABSTRACT   This write up focuses attention on a detailed report and account on the process of construction and formulation of plan for the actual and physical realization of the construction of the project work captioned fabrication and construction of a mobile cooling system.  The report is therefore divided into chapters and each chapter discussed extensively such that an illiterate refrigera...Continue Reading »

  Item Type: Project Material |  65 pages |  5,873 engagements | 

• 18. CONSTRUCTION OF A STANDARD BANKING OVEN (MINI-OVEN) WITH DUAL POWER SOURCE (ELEC...

  » ABSTRACT             This project is designed to make the students utilize as many theoretical and practical concept as have been instructed in alstron to mechanical engineering workshop technology. Students are expected to learn and apply concepts, principles about energy specially the conversions of  electrical energy to thermal energy, conduction and conventional heat transfer etc....Continue Reading »

  Item Type: Project Material |  65 pages |  0 engagements | 

• 19. CONSTRUCTION OF AN OPEN STEAM DISTILLATION

  » CHAPTER ONE   1.0     INTRODUCTION           Distillation is a separating technique in which two liquids are separated at essentially the same temperature and pressure.  It is also the term used to describe the operation where the vaporization of a liquid mixture yields a vapor phase containing more than one constituents and it is desired to recover one or more of this constituen...Continue Reading »

  Item Type: Project Material |  65 pages |  5,042 engagements | 

• 20. DESIGN AND CONSTRUCTION OF A WOODLATHE

  » ABSTRACT This write up outlines the design and fabrication of wood lathe machine. This type of lathe is capable of creating different wood designs using the cheapest available material and method. To achieve functional and efficient wood lathe of this kind, we analyzed as well as synthesized the different possible design solutions and concepts. The principle of turner is puts into consideration th...Continue Reading »

  Item Type: Project Material |  65 pages |  4,661 engagements | 

• 21. REPAIR OF A DAMAGED AIR CONDITIONER

  » ABSTRACT This project is basically on the repair of a damaged air conditioner. It is intended to provide a break through in the restoration of any damaged air conditioner and thereby curtail the huge expenses incurred in the replacement of the entire unit. This report covers an introduction into what an air conditioner is all about, it’s historical background and working principle. A view on...Continue Reading »

  Item Type: Project Material |  31 pages |  5,222 engagements | 

• 22. THE CONSTRUCTION AND FABRICATION OF A CANDLE MOULDING MACHINE

  » ABSTRACT The candle molding machine is a vital device which cannot be done without, in any nation. This is because of the indispensable role candle plays, especially when there is no either source of light. In order to enhance adequate supply to both urban and rural consumers, the production of a candle molding machine is important. The major component of the candle molding machine are: the castle...Continue Reading »

  Item Type: Project Material |  65 pages |  5,366 engagements | 

• 23. THE DESIGN AND FABRICATION OF MECHANICAL LAWN MOWER

  » ABSTRACT             Mechanical engineering department of the named institute has many non operational machines sequel to this fact maintenance which resulted to non development and non maintenance of the institute community at large.           By this fact the project (mechanical lawn mower) was constructed and design to help in the development and maintenance of institution,...Continue Reading »

  Item Type: Project Material |  65 pages |  0 engagements | 

• 24. A PROJECT ON CONSTRUCTION OF PROPELLER AGITATOR

  » ABSTRACT             Propeller agitator is a specialized of various types of substances.  It consists of three basic components which are the shaft, blade and the vessel.           In the construction, mild steel was chosen due to it’s inherent properties.  After the procurement, the following constructional operations were carried out which included marking out, center ...Continue Reading »

  Item Type: Project Material |  65 pages |  5,790 engagements | 

• 25. AN APPRAISAL OF THE ACTIVITIES AND MANAGEMENT METHODS OF ANAMMCO WORKERS MULTI-P...

  » CHAPTER ONE   1.0       INTRODUCTION 1.1   GENERAL INTRODUCTION   The population of this study is limited to the worker’s of ANAMMCO who come together of their own free will to form the ANAMMCO worker’s multipurpose co operative society Ltd.  This is made up of people who voluntarily associated together as human beings on the basis of equality, for their social economic interest....Continue Reading »

  Item Type: Project Material |  65 pages |  4,621 engagements |