What's your project topic?

Mechanical Engineering Project Topics & Research Materials | Final Year Research Project Topics With Free Chapter One

• 1. FABRICATION OF A POLYTHIENE BAG SEALING AND CUTTING MACHINE

  »   ABSTRACT This machine is meant for sealing and cutting of nylon bag of different sizes. This machine is operated with electrical system. This machine can cut and seal nylon of different sizes. It also comprises of materials as follows: Mechanical and Electrical section Mechanical section include the frame structure, lever and the pedal mechanism. Electrical section include the transformer, Regu...Continue Reading »

  Item Type: Project Material |  65 pages |  6,375 engagements | 

• 2. REPAIR OF AN AIRCONDITIONER

  » PREFACE A new machine/equipment will provide satisfactory service if kept in proper operating condition. The inevitability of less than 100% reliability of any machine/equipment after some period and maintenance. Also in system of any complexity, certain replacement adjustments are necessary at various stages. Thus a vital consideration in the design of the system components and requirement of a s...Continue Reading »

  Item Type: Project Material |  37 pages |  6,287 engagements | 

• 3. REPAIR AND MAINTENANCE OF A FAULTY DEEP FREEZER

  »   ABSTRACT Mechanical Engineering Department of the Institute of Management and Technology has many non – functional machines. This is caused as a result of poor maintenance culture, which in turn resulted to breakdown of the  Deep Freezer under review. Quality and effectiveness of machine maintenance were observed. A minimized cost of  maintenance and high Technology of repair were also adop...Continue Reading »

  Item Type: Project Material |  65 pages |  4,933 engagements | 

• 4. REPORT ON CONSTRUCTION OF NYLON SEALING AND CUTTING MACHINE

  » ABSTRACT The ease of cutting and sealing a nylon material especially during mass production of nylon bags using automated machine has necessitated the need to automate the process. Manual cutting and sealing of nylon films do not only waste time, it also increases cost of production as more than required people are employed to a job that can be automated. This project deals with the construction o...Continue Reading »

  Item Type: Project Material |  65 pages |  7,753 engagements | 

• 5. CONSTRUCTION OF A MOBILE REFRIGERATOR

  » ABSTRACT This write up is a detain of the process and formulation of plan for the physical realization of the construction of a mobile cooking system. It as divided into chapters, which discussed extensively the practical refrigerator cycle with attention given to constriction factors, working principle and choice of materials. The method used in the fabrication, assembly and arriving as knowing t...Continue Reading »

  Item Type: Project Material |  65 pages |  4,907 engagements | 

• 6. FABRICATION OF BENCH SHEARING MACHINE

  »   PREFACE             Our purpose of embarking on the construction of a project of this type is to present a vivid and understandable fact that if given the necessary supports, that we the youth and Engineers in potentials can move this country forward as regards to technological endeavours.             Such as bird eye view right from time immemorial has provide that a lot ...Continue Reading »

  Item Type: Project Material |  65 pages |  6,694 engagements | 

• 7. THE FABRICATION OF A SINGLE FACE PRESSURIZED KEROSENE COOKER

  » ABSTRACT This project is concerned with the fabrication of as a single face pressurized kerosene cooker. The report shows the possible way in which the above mentioned can be designed, fabricated and maintained. Its also shows the strength and properties of the materials it is made of. Defects of the equipment can come through inability to maintain and inability to use well. It can be due to irreg...Continue Reading »

  Item Type: Project Material |  65 pages |  5,152 engagements | 

• 8. DESIGN AND FABRICATION OF WOOD LATHE MACHINE

  »   ABSTRACT             To achieve the aim of producing a functional and efficient wood lathe machine.  We analyzed and as well synthesized the different possible design solutions and concepts.  We carried out the analysis of different component part of the machine to determine their suitable dimensions based on loading and stresses due to them.  We used available local material and...Continue Reading »

  Item Type: Project Material |  65 pages |  7,241 engagements | 

• 9. DESIGN AND CONSTRUCTION OF PUNCH AND DIE FOR PRODUCTION OF CUPS

  »   ABSTRACT             This project is constructed based on careful theoretical analysis of materials of chance and reasons for the selection of the materials.             The theoretical analysis of heat principles and temperatures of the different fervid which in solid stage should set in the mould were analyzed. The basic principles of cooling of the mould to avoid physi...Continue Reading »

  Item Type: Project Material |  65 pages |  5,100 engagements | 

• 10. DESIGN AND FABRICATION OF A 12M3 MOBILE DEEP FREEZER

  »   ABSTRACT             This write up is a detail of the process and information of plan for the physical realization of the construction of the 1M3 mobile deep freezer. It is divided into chapters, which discussed extensively the practical refrigeration cycle with full attention given to design factors working principle and choice of material. The method used in fabrication, assembly ...Continue Reading »

  Item Type: Project Material |  65 pages |  4,675 engagements | 

• 11. DESIGN AND FABRICATION OF A CREEP TESTING EQUIPMENT

  »   ABSTRACT             The process involves in the design and fabrication of a creep testing equipment ranges from carrying out the feasibility studying of the project to be designed in terms of functionality.  Since it is used in the testing of failure of material under loading different engineering materials employed in the design and fabrication includes bending moments and deflect...Continue Reading »

  Item Type: Project Material |  65 pages |  5,806 engagements | 

• 12. DESIGN AND FABRICATION OF A PALM FRUIT DIGESTER

  »   TABLE OF CONTENT  CHAPTER ONE 1.1              Introduction                                                    1.2              Manual Digester                                              1.3              Motorized Digester                 ...Continue Reading »

  Item Type: Project Material |  65 pages |  7,095 engagements | 

• 13. DESIGN AND FABRICATION OF CORN SHELLING MACHINE

  »   ABSTRACT             A machine for corn shelling is highly and greatly needed to consistency of usage of corn in local and international levels.             With regards to this indispensable needs, a corn shelling machine is designed which operates to remove the corn grains and leaving the cobs intact.             In attainment to this design objective and aim...Continue Reading »

  Item Type: Project Material |  65 pages |  10,496 engagements | 

• 14. REPAIR AND REHABILITATION OF A FAULTY AIR CONDITION

  »   ABSTRACT             The need for an authentic and reliable report relating to the repairs and rehabilitation of a faulty air conditioner is inevitable.             Many homes and offices uses the air conditioner to cool he temperature in their respective homes.  So the maintenance of the air conditioner should be a top priority of every individual in order to avoid huge ...Continue Reading »

  Item Type: Project Material |  65 pages |  5,785 engagements | 

• 15. DESIGN AND CONSTRUCTION OF A WOODLATHE MACHINE

  » ABSTRACT This write up outlines the design and fabrication of wood lathe machine. This type of lathe is capable of creating different wood designs using the cheapest available material and method. To achieve functional and efficient wood lathe of this kind, we analyzed as well as synthesized the different possible design solutions and concepts. The principle of turner is puts into consideration th...Continue Reading »

  Item Type: Project Material |  65 pages |  6,088 engagements | 

• 16. DESIGN AND FABRICATION OF A PILOT PRODUCTION PLANT FOR PAINTS (EMULSION AND TEXC...

  »   ABSTRACT             The concept of this project is to actualize a practical way of paint production using a locally design mixing machine which is design to meet a low cost and high standard paint.             The project cut across all forms of engineering, such as mechanical machine design of a simple industrial mixer, which is driven by an electrically made device, a 3...Continue Reading »

  Item Type: Project Material |  65 pages |  5,879 engagements | 

• 17. THE CONSTRUCTION AND FABRICATION OF A METAL BOOKSHELF

  »   ABSTRACT In our society today reading and writing has taken its roll as a way of measuring human knowledge.  Knowledge could only be obtain successively by the use of books for research but unfortunately because of hard time, books have because very expensive. This has called for preservation of books already purchased, whether in the public library school or in the house hold so that it can u...Continue Reading »

  Item Type: Project Material |  65 pages |  5,988 engagements | 

• 18. CONSTRUCTION OF AN ELECTRICAL STOVE WITH THREE-OVEN APARTMENT

  »   ABSTRACT            This project is concern about the construction of an electrical stove with three oven apartment is described in his project.  It was carried out in order to solve the problem often encounter in cooking and drying and at the same time finding an alternat6ive means to replace the use of  kerosine and gas for cooking and drying which are often not available due to s...Continue Reading »

  Item Type: Project Material |  65 pages |  6,316 engagements | 

• 19. DESIGN A ND FABRICATION OF A DUST EXTRACTOR

  »   ABSTRACT Man’s imp act on global environment system especially in the area of dust extraction is now at a scale where it is disrupting.  These dust extractors varies in major ways. The environmental degration is, in turn contributing to health threat in this part of the globe.  Unfortunately most factories, workshops which suppose to posses these machines for dust extractions a re not havin...Continue Reading »

  Item Type: Project Material |  65 pages |  4,749 engagements | 

• 20. DESIGN OF MELON DE-HUSKING AND SEPARATION MACHINE

  »   TABLES OF CONTENT CHAPTER ONE 1.1              Introduction                                        1.2              Description of the Design Melon                    1.3              Principles of Operation                       1.4              Advantages     �...Continue Reading »

  Item Type: Project Material |  65 pages |  6,662 engagements | 

• 21. DESIGN AND CONSTRUCTION OF A SPIN DRYER

  »   ABSTRACT This work is aimed at designing and fabricating a spin dryer which can be used in drying spent grains after brewing. This will no doubt save considerable human labours and time wastage involved in conventional method of drying the spent grains by spreading on the ground. It also saves as a means of employments for our teaming population. This machine was designed after due consideratio...Continue Reading »

  Item Type: Project Material |  65 pages |  8,340 engagements | 

• 22. DESIGN AND FABRICATION OF BASIC STATIC AND DYNAMIC BALANCING MACHINE

  »   ABSTRACT This work is an attempt to evolve a means for statically and dynamical balancing of mechanical components. This will no doubt evolve greater success in ensuring sound fabrication of our local machine and ensuring that life span of such machine is prolonged since vibration will be reduced to the bearest minimum. Every wheel and its shaft have to be in a state of balanced, two mating sha...Continue Reading »

  Item Type: Project Material |  65 pages |  6,460 engagements | 

• 23. REPAIR OF DEEP FREEZER

  »   ABSTRACT             This work gives an account of all activities carried out to restore a faulty and abandoned deep freezer to normal functioning.  This report therefore contains the different stages embarked in the execution of the project.  These include the literature back ground, checking’s conducted, cleaning, repair operations and replacement of some pants.        ...Continue Reading »

  Item Type: Project Material |  65 pages |  4,940 engagements | 

• 24. CONSTRUCTION OF TWO FACE GAS BURNER

  » ABSTRACT This project deals with the construction and fabrication of a two face gas burner. The gas components consists of the following major components; burner, injector opening, mixing tube, burner support, etc. The gas stove was constructed from medium carbon steel material. The choice of the selected material has to do with cost, and local availability. The distance between the cooking pot an...Continue Reading »

  Item Type: Project Material |  65 pages |  5,652 engagements | 

• 25. THE DESIGN AND CONSTRUCTION OF A HOT PRINTING MACHINE

  »   ABSTRACT             Parameters on which clear prints depends were comprehensively investigated.  The study revealed that clear print depends on the impressed pressure, the working temperature and the silver print paper.   Also studied were the manners of dependence of these parameters on prints impressed on sheets of varied thickness.  The result of this investigations were util...Continue Reading »

  Item Type: Project Material |  65 pages |  5,200 engagements |